Shimano 12-Speed Gearing Guide: Which Chainrings and Cassette?
50-34, 52-36 or 54-40? 11-30, 11-34 or 11-36? A clear guide to choosing Shimano 12-speed road gearing, with climbing and top-speed figures for every combination.
Choosing the right gearing is the most important decision when you configure a Shimano 12-speed groupset. Too big and you grind up climbs. Too small and you spin out on fast descents and group rides. This guide explains every Shimano 12-speed road option in plain numbers.
Your options at a glance
| Groupset | Chainrings | Cassettes |
|---|---|---|
| Dura-Ace R9270 Di2 | 50-34, 52-36, 54-40 | 11-30, 11-34 |
| Ultegra R8170 Di2 | 50-34, 52-36 | 11-30, 11-34 |
| 105 R7170 Di2 | 50-34, 52-36 | 11-34, 11-36 |
Chainrings: 50-34, 52-36 or 54-40?
- 50-34 (compact): the easiest gears. Best for mountains, long sportives, newer riders and anyone who prefers to spin.
- 52-36 (semi-compact): the most popular all-round choice. Enough top end for fast group rides, and still fine on most climbs with an 11-34.
- 54-40 (Dura-Ace only): for strong racers and time triallists on flat, fast courses. Not for hilly riding.
Cassettes: 11-30, 11-34 or 11-36?
- 11-30: single-tooth steps from 11 to 17, so cadence changes are tiny. Best for flat racing and fast group rides.
- 11-34: the best all-rounder. Slightly bigger steps, plus a 34-tooth bail-out sprocket for climbs.
- 11-36 (105 only): the lowest climbing gear in Shimano's road Di2 range. Great for steep hills and loaded riding.
Climbing gears compared
Speed at 70 rpm in the easiest gear, on a 700x28c tyre:
| Easiest gear | Ratio | Speed at 70 rpm |
|---|---|---|
| 34 x 36 | 0.94 | 8.5 km/h |
| 34 x 34 | 1.00 | 9.0 km/h |
| 36 x 34 | 1.06 | 9.5 km/h |
| 40 x 34 | 1.18 | 10.6 km/h |
| 36 x 30 | 1.20 | 10.8 km/h |
| 40 x 30 | 1.33 | 12.0 km/h |
On a long 8-10% climb, most club riders are happiest with a gear of 1.0 or lower.
Top-end speed compared
Speed at 90 rpm in the biggest gear (11-tooth sprocket), on a 700x28c tyre:
| Biggest gear | Speed at 90 rpm |
|---|---|
| 50 x 11 | 52 km/h |
| 52 x 11 | 55 km/h |
| 54 x 11 | 57 km/h |
Very few riders pedal hard above 55 km/h except in sprints and on descents. If you do not race, a 50-34 rarely holds you back.
Our recommended setups
| Rider | Chainrings | Cassette |
|---|---|---|
| Hilly sportives, Alps, Mallorca | 50-34 | 11-34 (or 11-36 on 105) |
| All-round club rider | 52-36 | 11-34 |
| Road racer, mostly flat | 52-36 | 11-30 |
| Strong racer or time triallist | 54-40 | 11-30 or 11-34 |
| Gravel and mixed terrain | See our GRX Di2 1x vs 2x guide |
Changing gearing later
You can swap cassettes and chainrings at any time. All Shimano 12-speed road cassettes fit the same freehub and work with every 12-speed Di2 rear derailleur. Shop Ultegra R8100 cassettes, the Dura-Ace R9200 cassette or our full chainsets collection. If you change cassette size, check your chain length. A new 12-speed chain is often the easiest fix.
Frequently asked questions
Is 52-36 or 50-34 better?
52-36 suits fitter riders and flatter riding. 50-34 suits hilly routes and riders who prefer a higher cadence. With an 11-34 cassette, both have good climbing gears.
Can I use an 11-36 cassette with Ultegra or Dura-Ace Di2?
Shimano lists the 11-36 for 105. Check Shimano's compatibility charts for your exact rear derailleur before mixing.
Do I need a new freehub for 12-speed?
No. Shimano 12-speed road cassettes fit the standard HG 11-speed road freehub.
Keep reading
Join the conversation